Add standard

After clicking Add standard, a window opens in where you can search for the standard. Then click on the standard to be added. Afterwards you may have to specify additional parameters. If you have selected the wrong standard or parameter, you can remove the selection by clicking on the X right next to the standard/parameter. To confirm the selection, click on the Add button.

The search requires at least three characters to be entered.

Delete standard

To delete a standard, click on the red recycle bin icon and confirm the deletion.

If standards have been added to a test report or test order, they cannot be deleted.
However, to delete standards from the test plan, you must first remove them from all test reports and test orders.

Is is possible that standards cannot be deleted, only deactivated. Learn more about this here: disable standards

A form linked to a standard is automatically attached to the information area when the standard is added.
To get to this form quickly, you can click the show button at Linked form. The form will then be opened in the information area.

Complete standard

For some components, standards are already stored and are automatically added to the test plan. However, some of them must first be completed, i.e. some parameters must still be selected. To do this, click on Complete and, if necessary, select further parameters.

Disable / enable standard

Deactivated standards will not be tested in the sampling process.

standards can only be disabled if:

  • A component has been delegated to you.

  • A standard is stored in the component and automatically added to the test plan.

To deactivate it, click on the red button at the bottom right of the standard. A window will then open in which you must enter a reason for the deactivation. Optionally, you can also add a comment and upload documents here. Confirm the deactivation with Save. A note and two new buttons then appear at the standard: Enable & Edit Reason.

To reactivate the standard, click on Enable.

If standards have been added to a test report or test order, they cannot be deactivated.
However, to deactivate standards, you must first remove them from all test reports and test orders.

In case you want to change your reason for the deactivation, click Edit reason.